---+!! Analog Multiplexed Readout System Documentation

Documentation

• fMuxSoftwareGuide Software guide for fMUX system.
• Readout electronics hardware manual
  • Berk-CMB-Readout-2005Mar18-MDobbsRev2.pdf: V2, for hardware Rev C, Oct 2006
  • Berk-CMB-Readout-2005Mar18-Rev2_1.pdf: V2.1, for hardware Rev C, Nov 2006
  • Berk-CMB-Readout-2005Mar18-Rev2_2draft.pdf: V2.2, for hardware Rev C, Feb 2007 (draft, still needs to be cleaned up a little).
• Berk-CMB-Readout-2005Jan11-MDobbsRev1_1.pdf: Readout electronics setup guide, V1.1
• 2006-Wiener9UVME_Crate Documentation about the Wiener 9U VME crate, fans, and power supplies for the analog fMUX system.
  • WienerCrateSetup Setup of the Wiener 9u VME crate
• 2006-03-08-QualityControlOverview.pdf: T. Lanting, Quality Control Process Overview
• 2004-11-11_MLueker-DIOFormat.pdf: M. Lueker, Description of DIO Server, Nov 2004

Note: John uploads his design files to http://www-eng.lbl.gov/~jmjoseph/CMB/BIN/.

Firmware

• http://www-eng.lbl.gov/~jmjoseph/CMB/BIN/VHDL-History.txt John's firmware revision notes.
• http://www-eng.lbl.gov/~jmjoseph/CMB/BIN/ John's directory for firmware uploads
• 2006-02-08_OscDemodRegisterMapOscDemodRevC-v1.4.pdf Register map for Osc/demod board, Rev C, Feb 8, 2006
• cmb_sq_rev2_01.exo: Firmware for SQUID controller
• cmb_sq_rev2_01.mcs: Firmware for SQUID controller in .mcs format. Useful for later versions of Impact

Schematics

• AccessoryDocs Documentation for "accessories", such as level translators.
• CMB-Readout-Schematic-2007-SquidCrtlRev3BuildC.pdf: Squid Controller Rev3, Assembly C Schematics
• Berk-CMB-Readout-Schematic-2004Dec-SquidCrtlRev3BuildB.pdf: Squid Controller Rev3, Assembly B Schematics
• Berk-CMB-Readout-Schematic-2006Jun-OscDemodRevCBuild3-AsBUILT.pdf: Osc Demod Rev3, Assembly B Schematics
• Berk-CMB-Readout-Schematic-2006Sep-ClockDistributionRevC_AsBuilt.pdf: Clock Board Rev C (compatible with osc/demod board Rev C, as deployed for APEX/SPT)
• Berk-CMB-Readout-Schematic-2004Dec-BackPlanesRev1.pdf Schematic for backplane (there is only one revision of this board - all crates use these boards).

Squid Controller

• Summary of modifications for SQUID controller Rev. 3 Build II and Build III (changes to the bolometer, nuller Rx circuits). The full summary of the official builds for this boards are here (we are calling these builds I, II and II): http://bolo.berkeley.edu/internal/apexsz/apex_online_log/index.php/2006-09-31
• http://bolo.berkeley.edu/internal/apexsz/apex_online_log/index.php/2006-11-27 Trevor's separate work in progress page for the lead-lag modifications for long striplines
• Berk-CMB-Readout-2005Jan-CVu.pdf: Protocol for SQUID Controller Communications
  • 2005-01_Squid_Protocol_Rev2_01.xls: Protocol for SQUID Controller Communications (.xls)
• Commissioning log for squid controllers 100 and up
• Berk-CMB-Readout-Schematic-2004Jul-SQCtrlToSQMountConnections.pdf: Pinouts for going from the Squid control board to the PC board the SQUIDs are mounted on.
• Squid Controller Design Files (includes orcad files, Gerbers, BOM, etc.)
• Modifications for Rev 4 Squid Controller destined for SPTpol.
• Part Numbers for squid controller accessories and other controller related items
• MGDSQ4 DAN Squid Controller Twiki page

Quality Control Documentation

• QC results on all analog boards reside here: http://bolo.berkeley.edu/internal/mux/QualityControl
• instructions_receivingSQUIDController.txt: SQUID controller QC worksheet

Notes

• 2007_Berkeley-SQUIDMountingProcedure.pdf: Memo describing assembly procedure for SQUID mounting boards. From UC Berkeley POLARBEAR wiki.

Stripline Stuff

* StriplineRecord

* StriplineCharacterization

---

This topic: AnalogFMux > WebHome Topic revision: r30 - 2012-06-14 - JeanFrancoisCliche

---