These componets should be updated before any new boards are fabed

  1. Change R5 from 1kohm to 50 kohm
  2. Change R10 from 1kohm to 50 kohm
  3. Update P6, microSD slot.
  4. Reduce tolerance on R7 (currently at 1%, reduce as low as possible --cost?)

This topic: CryoElectronics > WebHome > ComponentUpdates Topic revision: r1 - 2013-12-03 - JamesKennedy
© 2020 Winterland Cosmology Lab, McGill University, Montréal, Québec, Canada